Urban Terror Forums: Sample Punkbuster Configuration - Urban Terror Forums

Jump to content

 Login | Register 
Advertisement
  • (2 Pages)
  • +
  • 1
  • 2
  • You cannot start a new topic
  • This topic is locked

Sample Punkbuster Configuration Rate Topic: -----

#1 User is offline   rashly (old) Icon

  • Joined: 08-February 04
  • Posts: 352
  • Locationlong island

Posted 02 April 2004 - 10:31 PM

This usually goes in punkbuster.cfg

;Auto Generated by PunkBuster Server

PB_SV_cvarempty // Empties any existing cvar checks.

pb_sv_MsgPrefix "Punkbuster" //[PB Message Prefix (default=^3PunkBuster Client)]
pb_sv_MaxDlRate 1 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 4 //[concurrent downloads (default=1)]
pb_sv_KickLen 2 //[minutes (default=2)]
pb_sv_CvarFreq 6 //[# of range checks per minute]
pb_sv_CvarLogging 2 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 4 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 15 //[How often (in min.) to auto-send CvarUser command]
pb_sv_CvarChangedPulse 15 //[How often (in min.) to auto-send CvarChanged command]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogCeiling 1000 //[High log filename serial #]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 100 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 640 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 480 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 100 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 100 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
pb_sv_SsDelay 15 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 300 //[Minimum # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 1200 //[Maximum # of seconds to wait before requesting next ss]
pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[power points]
pb_sv_PowerDef 1 //[power points]
pb_sv_PowerKickLen 2 //[minutes (default=5)]
pb_sv_scoreKick -3 //[minimum score (negative)]
pb_sv_changePeriod 60 //[seconds]
pb_sv_changeMax 3 //[max name changes allowed]
pb_sv_dupNameGrace 20 //[seconds]
pb_sv_autoUpdBan 1 //[0=No, 1=Yes (default=0)]
pb_sv_extChar 0 //[0=No, 1=Yes (default=0)]
pb_sv_guidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_cqc 0 // Tells clients of server requests (i.e. Screenshots)
pb_sv_EmptyName 1 // Kicks all players with empty name.

;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
pb_sv_cvarempty
pb_sv_cvar cg_thirdperson in 0
pb_sv_cvar cg_bobup IN 0 0.5
pb_sv_cvar cg_bobpitch IN 0 0.5
pb_sv_cvar cg_bobroll IN 0 0.5
pb_sv_cvar cg_runroll IN 0 0.5
pb_sv_cvar cg_runpitch IN 0 0.5
pb_sv_cvar cl_timenudge IN -50 0
pb_sv_cvar r_gamma IN 0 3
pb_sv_cvar r_intensity IN 1 1
pb_sv_cvar r_mapoverbrightbits IN 0 2
pb_sv_cvar r_overbrightbits IN 0 2
pb_sv_cvar rate IN 10000 25000
pb_sv_cvar snaps IN 20 42
pb_sv_cvar pmove_fixed IN 0 0
pb_sv_cvar com_maxfps OUT 0.000001 29
pb_sv_cvar cl_packetdup IN 0 3
pb_sv_cvar cl_pitchspeed OUT -50 50
pb_sv_cvar cl_maxpackets IN 30 42
pb_sv_cvar cl_freelook in 1
sv_punkbuster 1
pb_sv_restrictions 1


#2 User is offline   Aarsbuds0r (old) Icon

  • Joined: 21-January 04
  • Posts: 1,334
  • LocationNetherlands, The

Posted 03 April 2004 - 12:37 AM

Uhm, nice that you want to help, but I see lots of bs... Why guidrelax 6? And those cvar-checks make no sense...

Why check for cg_thirdperson??
Why check for gamma/intensity/overbrightstuff?
Why check for snaps?
Why check that fps is without 0.000001 to 29?
why check for packetdup?
why check for maxpackets?
why check for freelook?

THey are all cvars that are already locked by Urt or do no harm...

#3 User is offline   rashly (old) Icon

  • Joined: 08-February 04
  • Posts: 352
  • Locationlong island

Posted 03 April 2004 - 01:30 AM

thirdperson is there to stop spec 3rd person.
the rest of the ones you listed are values from standard league configs (TWL, STA). that is what is used in the leagues, so that is what i listed.

#4 User is offline   Aarsbuds0r (old) Icon

  • Joined: 21-January 04
  • Posts: 1,334
  • LocationNetherlands, The

Posted 03 April 2004 - 10:02 AM

Then those leagues have dont know what they're doing.

#5 User is offline   [PoD] Hitman Arias (old) Icon

  • Joined: 07-February 04
  • Posts: 135
  • LocationNorthern Cali.

Posted 04 April 2004 - 08:24 AM

Instead on knocking a guy trying to help the rest of us, why dont you post something that you know works? All you've done is comment on how much BS is on those cfg's.

Thanks Rashly for posting.

bullet_loaderAdvertisement

#6 User is offline   Aarsbuds0r (old) Icon

  • Joined: 21-January 04
  • Posts: 1,334
  • LocationNetherlands, The

Posted 04 April 2004 - 06:20 PM

[quote name='"Aarsbuds0r"]Uhm' date=' nice that you want to help, but I see lots of bs... Why guidrelax 6? And those cvar-checks make no sense...[/quote']`

I told him its nice that he wants to help, but giving wrong help is just not good. :?

#7 User is offline   [PoD] Hitman Arias (old) Icon

  • Joined: 07-February 04
  • Posts: 135
  • LocationNorthern Cali.

Posted 04 April 2004 - 06:43 PM

Agreed, but there is a better way to let someone know they are doing something wrong. I would have said something like, "you need to change these cvars because they are no longer or never have been usefull"...then explain the way they should have been.

Sorry if I came off rather harsh, just that I am tired of flaming people that actually try and help out the community.

#8 User is offline   Aarsbuds0r (old) Icon

  • Joined: 21-January 04
  • Posts: 1,334
  • LocationNetherlands, The

Posted 04 April 2004 - 09:47 PM

Ye, okay, I apolagise for sounding like a dick in my earlier posts, I didnt mean to. He was idd trying to help, shouldnt have been so harsh.

#9 User is offline   rashly (old) Icon

  • Joined: 08-February 04
  • Posts: 352
  • Locationlong island

Posted 05 April 2004 - 12:57 AM

no problem. again, if you think i should change anything in them let me know. the punkbuster settings will stay because that's what the leagues have as requirements.

#10 User is offline   Alpha-Slayer (old) Icon

  • Joined: 13-May 04
  • Posts: 352

Posted 20 May 2004 - 03:15 AM

He did help me through a problem without flaming me for some whap *ay questions!! With much patience I must add. That's all I have!!!

  • (2 Pages)
  • +
  • 1
  • 2
  • You cannot start a new topic
  • This topic is locked

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users

Sponsored link
https://www.urbanterror.info/members/donate/


Copyright © 1999-2024 Frozensand Games Limited  |  All rights reserved  |  Urban Terror™ and FrozenSand™ are trademarks of Frozensand Games Limited

Frozensand Games is a Limited company registered in England and Wales. Company Reg No: 10343942