Good morning all
I have been trying for almost 2 days, to configure a server to play online with friends.
I have knowledge, I am IT / network technicians.
It is not visible online but locally only.
My port forwarding to my pc is done (UDP / TCP port 27960)
I have a doubt on the arguments to put in the target of the shortcut because I saw a lot of different tutorials.
Anyone have an idea to help me in my diagnostic?
Thank you beforehand.
Advertisement
Page 1 of 1
server problem not visible online
#2
Posted 04 May 2020 - 03:28 PM
First make sure the variable *dedicated* is set to "2" on your server, by typing "dedciated" into the server console.
IIRC dedicated has to be passed as a command line argument and cannot be loaded from the config. (i might be wrong about that limitation tho):
Next make sure the server actually reports to the master server, by checking that
Given port forwarding being set up, it should "just work".
IIRC dedicated has to be passed as a command line argument and cannot be loaded from the config. (i might be wrong about that limitation tho):
Quake3-UrT-Ded.exe +set dedicated "2" +exec "server.cfg"
Next make sure the server actually reports to the master server, by checking that
- Its sv_master is set correctly. Check that in the server console as well. It should be set/defaulted to master.urbanterror.info
- Check that your server is allowed to open a outgoing connection
Given port forwarding being set up, it should "just work".
Sorry for my bad spelling - I am still asleep. :)
|=| Iye's UrT Addon |=| Firefox Personas |=| Maps |=|
http://www.mediafire...vk3a602hcfg.jpg
|=| Iye's UrT Addon |=| Firefox Personas |=| Maps |=|
http://www.mediafire...vk3a602hcfg.jpg
#3
Posted 04 May 2020 - 04:55 PM
Thank you for your reply.
I checked the arguments by trying:
Quake3-UrT-Ded.exe + dedicated set 2 + exec server.cfg without results
I get this in the console
https://www.casimage...450629.png.html
I also tried with these arguments (found on the net) but without success
Quake3-UrT-Ded.exe +set dedicated 2 +set net_ip my public IP +set net_port 27960 +exec server.cfg
I get a network error which intrigues me however
https://www.casimage...462825.png.html
If you have other diagnostic ideas, I am interested :)
Edit:
I also tested with another internet access (4G router) with port forwarding, and modified public ip same problem
I checked the arguments by trying:
Quake3-UrT-Ded.exe + dedicated set 2 + exec server.cfg without results
I get this in the console
https://www.casimage...450629.png.html
I also tried with these arguments (found on the net) but without success
Quake3-UrT-Ded.exe +set dedicated 2 +set net_ip my public IP +set net_port 27960 +exec server.cfg
I get a network error which intrigues me however
https://www.casimage...462825.png.html
If you have other diagnostic ideas, I am interested :)
Edit:
I also tested with another internet access (4G router) with port forwarding, and modified public ip same problem
This post has been edited by Matth002: 04 May 2020 - 05:03 PM
#4
Posted 04 May 2020 - 05:54 PM
Did you just typo "+ dedicated set 2" here, or is that what you tried?
The first image looks like the server is running. It might not have loaded a map (depending of whether there is an active map command at the end of the server cfg). It says its sending a heartbeat to the master server, which it correctly resolved.
I'm not sure what specifying net_ip actually does, but it shouldnt be nessecary. Neither is specifying the port, since its the default port.
The first image looks like the server is running. It might not have loaded a map (depending of whether there is an active map command at the end of the server cfg). It says its sending a heartbeat to the master server, which it correctly resolved.
I'm not sure what specifying net_ip actually does, but it shouldnt be nessecary. Neither is specifying the port, since its the default port.
Sorry for my bad spelling - I am still asleep. :)
|=| Iye's UrT Addon |=| Firefox Personas |=| Maps |=|
http://www.mediafire...vk3a602hcfg.jpg
|=| Iye's UrT Addon |=| Firefox Personas |=| Maps |=|
http://www.mediafire...vk3a602hcfg.jpg
#5
Posted 04 May 2020 - 07:40 PM
I must have made a typo earlier.
I put this argument in the shortcut
https://www.casimage...330946.png.html
I had not modified the mapcycle exemple.txt
This time I renamed the mapcycle.txt as written in the server.cfg
"set g_mapcycle "mapcycle.txt" // Name of mapcycle-file, located in q3ut4 directory"
I also checked the map at the end of the server.cfg
When restarting I always see my server but only in LAN
I must have missed something.
I put this argument in the shortcut
https://www.casimage...330946.png.html
I had not modified the mapcycle exemple.txt
This time I renamed the mapcycle.txt as written in the server.cfg
"set g_mapcycle "mapcycle.txt" // Name of mapcycle-file, located in q3ut4 directory"
I also checked the map at the end of the server.cfg
When restarting I always see my server but only in LAN
I must have missed something.
Advertisement
Page 1 of 1
Fast Reply
1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Advertisement