As of right now 6800 series cards are not compatible w/ Techtool Pro 4.
You cant boot from the Techtool disc to do repairs if you have that card installed. In fact you wont be able to boot from a firewire drive either.
The drivers for that card arent available w/ the current version of Techtool 4. They are coming in a future release but who knows when that is.
Youll have to install any G5 compatible vid card like an ATI 9600 Pro or XT and then you can boot from the disc.
Advertisement
Page 1 of 1
- You cannot start a new topic
-
This topic is locked
nVidia 6800 series vid card and TechTool Pro 4
Rate Topic:
#1
fragomatic 
Posted 18 February 2005 - 02:09 AM
MultiQuote
#2
HornetOSX (old)
- Joined: 07-February 04
- Posts: 332
- LocationDenver CO Home of the Av's
Posted 18 February 2005 - 06:40 AM
you cant rebuild a boot disk for it with at least the 10.3.7 vid driver set ?
I thought I read somewhere about doing this ..
I thought I read somewhere about doing this ..
#3
fragomatic
Posted 18 February 2005 - 03:18 PM
TTP4 is still running w/ pre 10.3.5 drivers. It causes Kernal Panics if you try to use it on a machine w/ a 6800 card. Some people have been using
"slipy" to create a bootable disc so they can use Disk Utilities repair option.
It turns out that TTP4 hasnt had an update since late August 04. I didnt
realize this problem was that old.
"slipy" to create a bootable disc so they can use Disk Utilities repair option.
It turns out that TTP4 hasnt had an update since late August 04. I didnt
realize this problem was that old.
Page 1 of 1
- You cannot start a new topic
-
This topic is locked
1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users
Advertisement