[mcdesign (old)]

Hi, does anyone know what the standard ports used by UrT? My clanmembers can't connect when i only open port 27960 (udp).
Thank you 

Martin

[ChidoriARX7 (old)]

Open both TCP and UDP ports. If you're behind a router, be sure to use port forwarding to forward 27960 UDP and TCP.

[mcdesign (old)]

Thank you, but it doesn't work. Both UDP and TCP are open, and firewall is down.
The server connects to master.urbanterror, quakenet but not master2.
The server name is [NoobForce] Clan NL server. Could anyone look if you can see him?

[ChidoriARX7 (old)]

If you are using Windows Firewall, do NOT turn it off. This does not open all ports. In fact, it closes them all. Also, if you have some kind of VPN program such as Hamachi, it will interfere with your server. You might want to check on your external IP, too. just go to www.whatismyip.org to see. This is your external or WAN IP that you need to give out to your clan members.

[mcdesign (old)]

No, it's on a dedicated Linux server
my ip is 89.220.115.71

[Woekele]

I have windows firewall turned off and it does not close all ports I do not see the server. Type 'net_ip <enter>' in the server console, also type 'dedicated <enter>' and give us the output

I scanned the IP and did not get a reaction from the server. I would say you didn't forward properly

[mitsubishi]

Quote

Open both TCP and UDP ports.

It doesn't use TCP. It won't have an effect. Of course if one doesn't plan to use another service in the tcp port, as usual, it wouldn't matter enough.

[mcdesign (old)]

@ Woekele:
Net_ip = "localhost"
dedicated = 2

[Woekele]

That's good. I really doubt if your ports are forwarded correctly then.

PS: Also check net_port.

[mcdesign (old)]

= 27960.
My router (Speedtouch 546) has many auto-configs for gameservers. When i make a special one, UrT with the ports 27960 UDP forwarded to server (dns name  ). When i use Quake 3, this ports are forwarded automatic: 27660 - 27692.

May that solve the problem?